Share to:

X16.0T

Availability:
Quantity:

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


Intelligent by Design

The incorporation of a CAN-Bus system allows for a seamless connection of the vehicle Control Module (VMC) and Engine Control Module (ECM). This allows immediate exchange and accessibility to all data. Additional benefits include a significant reduction in wiring as well as increased functionality over conventional systems. The CAN-Bus system also delivers excellent reliability and full diagnosis capabilities, simplifying the servicing of the truck.

Power & Performance

Maximal 14-32t / 30,000-70,000 LB capacity forklift range is available with Cummins Diesel engine meeting a world standard Tier 3 NRMM emissions legislation: 

   



12-20t / 26,000-44,000 LB capacity forklift

20-32t / 30,000 / 70,000 LB capacity forklift

Cummins QSB 6.7 diesel engine features:

Cummins QSC 8.3 diesel engine features:

› 6-cylinder in-line, 6.7 liter displacementCharge-air cooling w/waste gate controlled turbocharger

› 6-cylinder in-line , 6.7 liter displacement Charge-air cooling w/ waste gate controlled turbocharger

›Max 142 kW (192 Hp) output at 2300 rpm,offering extra durability for long periods of peak performance.

›Max 176 kW (238 Hp) output at 2500 rpm, offering extra durability for long periods of peak performance.

Smooth torque of 930 Nm / LB FT at 1500 rpm
provides excellent acceleration for maximum power

Smooth torque of 1085 Nm / LB FT at 1500 rpm
provides excellent acceleration for maximum

› Engine protection system, sensing low oil pressure and high coolant temperature monitors the engine performance and shuts down the engine prior to a possible failure.

An override function for emergency situations is a standard feature.

Improved Fuel Economy

Minimize Tier 3 requirements

Program to Lower Rated Speeds to offset fuel consumption

Alternate Governor and Torque settings

Maintain fuel economy with HPCR ECM system compared to mechanical system

World Class Efficient ZF Transmission

ZF transmission from Germany in Maximal 14-32t/30,000-70,000 LB capacity heavy duty forklift trucks

ZF transmissions offer these features:

› Fully reversible power shift control

› 3 forward and 3 reverse speeds

› Positive speed engagement

› Reduction of operating costs

› Lower operating noise

› Customer orientated serviceability

› Applicable for electronic driveline management and inching


Transmission

1.Power shift transmission with torque converter features two (2) pedal inching and brake control and full reversal allowing faster cycle times.
2.The 100% differential is specifically designed for rough terrain and features automatic differential lock providing ultimate traction during inclement weather conditions and rough operating surfaces.


Lower Maintenance Drive Axle & Brakes

›German KESSLER drive Axle provides excellent lateral stability and long-term durability.

Full floating axle shafts and hub planetary final drives reduce axle windup to deliver higher torque to the drive wheels allowing greater tractive effort and performance.

›Multi-plate wet disc braking system supplied by American MICO Corp. offers more effective and reliable braking.

   

Superior visibility

The Cab also contributes to providing the driver with panoramic 360 Degree visibility, featuring:

› Large curved front window, fitted with tinted safety glass provides better visibility.

› Curved rear window with one-piece glass.

› Minimum use of steel parts, providing the maximum possible glazed area.

› Wide-view rear view mirrors are mounted inside the cab stay cleaner and are protected from damage.

› The dash and display panel is mounted to the right hand side of the driver, so visibility through the windshield is unobstructed.

› Excellent rearwards visibility is enhanced with the sloping design of the hood and counterweight.

› A clear view to the front load and surrounding area is optimized through the Maximal wide view mast.

   

Maintenance Intervals Doubled and Efficient Diagnostic program

› Cummins Tier 3 Scheduled Maintenance

500 hours/6 month intervals for charge air cooled; same schedule for coolant changes; Dual Stage fuel filtration to improve particle separation, filter life and protect vital fuel system components.

› Equipped as standard with either a manual or power hydraulic tilting cab, to ensure easy access to major components for inspection and service.

› Low side steps and large grab handles, providing operators safe and easy access to the operators cab.

Technicians can use side steps for daily inspections and maintenance.


› Uniform placement of electrical and hydraulic tubing and hoses.

› Centralized diagnostics in the operator cab

› ‘CAN bus’ receptacle in the operator cab, for engine, transmission, hydraulics and instruments monitor panel.

› LCD display with diagnostics for engine, transmission and electrical systems to quickly identify service needs.

› Standard oil-immersed (wet) multi-plate disk brakes are virtually maintenance free.



   

Green & Clean

Euro III / EPA: Diesel engines that incorporate Japanese and American advanced engine technologies feature excellent environmental performance and conform to the world latest EPA Tier3 and EU Stage IIIA emission regulations.

   

Optional Equipment

› Specific masts 3M/118" MFH to 6M/240" MFH Simplex mast

>Side shift/Fork position carriages with shaft type forks

› Solid Pneumatic size tires

› Air conditioning

› Rear camera surveillance system

› Special RAL colors

› Various attachments

>Contact your MAXIMAL dealer in your area for additional details.



Engine


Forklift Specification

Model
FD160T-MXWS3
Power type
Diesel 
Rated capacity Kg 16000
Load center mm 600
Lift height mm 4000
Mast tilt angle front/rear Deg 6\12
Fork Fork dimension (L×W×T)
1500×200×90
Fork regulating range 
840-2150
Max.sideshifter range mm 630(±315)
Min. Ground clearance(Bottom of mast) mm 250
Overall dimension Overall length(include forks) mm 6850
Overall width mm 2430
Overall height Driver's cabin  mm 3190
Mast mm 3870
Min.turning radius mm 5100
Wheelbase mm 3500
Tread Front mm 1743
Rear mm 2050
Tyre Front
12.00-20-20PR
Rear
12.00-20-20PR
Spead Travel(Unladen) km/h 26
Lifting(Laden) mm/sec 350
Lowering(Laden) mm/sec 380
Max.Drawbar pull(Laden) KN 100
Max.Gradeability(Laden) % 22
Self weight Kg 21500
Engine Model
QSB6.7-C173
Manufacturer
Cummins
Rated output/r.p.m. Kw 129/2200
Rated torque/r.p.m. Nm 799/1400
No. of cylinder
6
Bore x stroke mm 107×124
Displacement L 6.7
Fuel tank capacity L 140
Transimission Manufacturer
ZF
Model
3WG171
Stage front/rear
3\3
Battery Voltage/Capacity V/Ah 2×12/120
Operating pressure(For attachments) Mpa 19



Previous: 
Next: