8.0-compact12.0T
Home » Products » M Series Forklifts » M Series Diesel Forklifts » 8.0-compact12.0T
Share to:

8.0-compact12.0T

Availability:
Quantity:

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications. 
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.

   


ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.

   

HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.

   

COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.

   

ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.

   

A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace. 
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.

   

EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.

   

Engine


Forklift Specification

General 1 Model
FD80T-MWF3 FD100T-MWF3 FD120T-MXWQ3
2 Optional type
WL3/G(4)3 /
3 Rated capacity kg 8000 10000 12000
4 Load centre mm 600
Characteristic & Dimension 5 Lift height mm 3000
6 Free lift height mm 210 210 210
7 Fork size L×W×T mm 1220×175×80 1220×175×80 1220×175×83
8 Fork regulating range Min./Max. mm 340/1970 435/2100 435/2115
9 Mast tilt angle F/R Deg 6°/12°
10 Front overhang mm 718 718 820
11 Rear overhang mm 740 740 790
12 Min. ground clearance(Bottom of mast) mm 250 250 275
13 Overall dimensions Length to face of fork  mm 4260 4260 4610
 (without fork)
14 Overall width mm 2248 2248 2250
15 Mast lowered height mm 2850 2850 3015
16 Mast extended height  mm 4230 4230 4470
(with backrest)
17 Overhead guard height mm 2563 2563 2630
18 Turning radius(outside) mm 3700 3900 4200
19 Min. right angle stacking aisle width  (add load length and clearance) mm 3540 3540 3850
Performance 20 Speed Travel(Laden/Unladen) km/h 26/28 26/28 23/26
21 Lifting(Laden) mm/s 310 310 340
22 Lowering(Laden) mm/s 400 400 360
23 Max. Drawbar pull(Laden/unladen) KN 58 58 58
24 Max. Gradeability(Laden) % 20 20 23
Tyre 25 Tyre Front
9.00-20-14PR 9.00-20-14PR 10.00-20-18PR
26 Rear
9.00-20-14PR 9.00-20-14PR 10.00-20-18PR
27 Tread Front mm 1600 1600 1640
28 Rear mm 1700 1700 1880
29 Wheelbase mm 2800 2800 3000
Weight 30 Self weight kg 11520 12830 15750
31 Weight Distribution Laden Front  Axle kg 17200 20380 25080
32 Rear Axle kg 2320 2220 2670
33 Unladen Front Axle kg 5100 5700 7400
34 Rear Axle kg 6420 6900 8350
Power & Transmission 35 Battery Voltage/Capacity V/Ah 2×12/80
44 Transmission Manufacture
China
45 Type
Powershift
46 Stage F/R
2/2 2/2 2/2
47 Operating pressure(For attachments) Mpa 19.5 19.5 21




Previous: 
Next: