Share to:

5.0-7.0T

Availability:
Quantity:

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications. 
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.

   


ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.

   

HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.

   

COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.

   

ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.

   

A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace. 
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.

   

EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.

   

Engine


Forklift Specification

General 1 Model
FD50T-MWJ3 FD70T-MWJ3

Optional Type
WL3/WY3/WF3/G(4)3
2 Power type
Diesel
3 Rated capacity Kg 5000 7000
4 Load centre mm 600 600
Characteristic & Dimension 5 Lift height mm 3000 3000
6 Free lift height mm 195 205
7 Fork size L×W×T mm 1220×150×55 1220×150×65
8 Fork regulating range Min./Max. mm 300/1845 300/1845
9 Mast tilt angle F/R Deg 6°/12° 6°/12°
10 Front overhang mm 580 590
11 Rear overhang mm 600 740
12 Min. ground clearance(Bottom of mast) mm 200 200
13 Overall dimensions Length to face of fork mm 3440 3580
(without fork)
14 Overall width mm 1995 1995
15 Mast lowered height mm 2500 2625
16 Mast extended height                     mm 4370 4370
 (with backrest)
17 Overhead guard height mm 2435 2435
18 Turning radius(outside) mm 3250 3370
19 Min. right angle stacking aisle width(add load length and clearance)                                mm 2960 3040
Performance 20 Speed Travel(Laden/Unladen) Km/h 24/26(WJ3) 24/26(WJ3)
21 Lifting(Laden/Unladen) mm/s 400/420(WJ3) 380/400(WJ3)
22 Lowering(Laden) mm/s 500 500
23 Max. Drawbar pull(Laden) KN 53 49
24 Max. Gradeability(Laden) 15 17
Tyre 25 Tyre Front
8.25-15-14PR 8.25-15-14PR
26 Rear
8.25-15-14PR 8.25-15-14PR
27 Tread Front mm 1470 1470
28 Rear mm 1700 1700
29 Wheelbase mm 2250 2250
Weight 30 Self weight kg 8080 9450
31 Weight Distribution Laden Front  Axle kg 11250 14150
32 Rear Axle kg 1830 2300
33 Unladen Front Axle kg 3640 4250
34 Rear Axle kg 4440 5200
Power&Transmission 35 Battery Voltage/Capacity V/Ah 2×12/80
36 Transmission Manufacture
China
37 Type
Powershift
38 Stage F/R
2/2
39 Operating pressure(For attachments) Mpa 19.5





Previous: 
Next: