3-wheel 1.6-2.0T
Home » Products » M Series Forklifts » M Series Battery Forklifts » 3-wheel 1.6-2.0T
Share to:

3-wheel 1.6-2.0T



The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.

Compact Design

The dual drive motor concept drives both drive wheels to create added traction on slippery surfaces, dock plates and ramps to move loads efficiently and safely. The steering wheel angle controls each drive motor and allows one motor to reduce power when making short turns. When the steering wheel is turned 45 degrees the inside drive motor cuts out allowing the outer drive wheel more tractive force. When the steering wheel is turned 90+ degrees the inner drive wheel will reverse direction to assist maneuverability allowing the machine to turn on its most inner axis.

This unique feature allows the machine excellent maneuverability and versatility in multiple applications. Power steering provides less effort

Reducing operator stress and fatigue.

The battery compartment is designed for the battery to be positioned low in the frame for added stability.


Electrical Systems

The truck is equipped with AC type drive, pump and steering motors providing high torque performance and reduced maintenance.

The proven and reliable ZAPI AC controller provides infinitely variable drive and lift control and features regenerative braking to capture and reserve energy. The regenerative braking feature is programmable for specific applications and increases run time between charges.

An emergency power disconnect switch is within easy reach should an electrical failure occur.

Panoramic View Mast

Superior quality I beam and C channel mast construction creates a robust, rigid mast eliminating deflection for maximum durability and performance.

Large inner and outer rail rollers provide additional capacity, less friction and resistance to wear compared to lighter materials used by competitive manufactures. Lateral stress is reduced by the side thrust rollers positioned on rails and carriage and are externally adjustable to provide specified alignment while reducing maintenance costs.

The hydraulic lift system is designed with a load lowering valve that reduces decent should the system lose pressure.

Operator Convenience And Protection

Large grab handle and low step height allows easy operator access-egress to the low profile operator’s compartment. The premium suspension seat with fully adjustable forward, aft and lumbar positions allow added comfort for various sized operators. Forward right hand hydraulic control levers are ergonomically positioned for easy reach permitting one hand multi functions. Large floor space with common automotive pedal arrangement provides precise acceleration and braking performance.

Lighted LED display panel is positioned in direct line of sight and monitors all component functions including battery charge level, travel speed directional control and hour meter. The monitor features on board diagnostic with LED icons and phases to alert the operator of systems malfunction and reduces downtime for required maintenance.


Convenient And Easy Mantenance

The hinged battery compartment cover is lightweight and easy to operate. The electrical control panel and related equipment is located behind the battery providing easy access and is protected from floor debris, contaminants and moisture.


Clean And Green

MAXIMAL tri-wheel lift trucks are designed to be efficient, quiet and provide a clean air environment.

Low noise, less pollution and safe operation.


Forklift Specification

Specification 1 Model
2 Rated capacity kg 1600 1800 2000
3 Load centre mm 500
4 Lifting height mm 3000
5 Free lifting height mm 0
6 Fork size T×W×L mm 35×100×920
7 Tilting angle F/R(α°/β°) Deg 6.5°/6.5°
Dimensions 8 Overall Dimension  Length (to forkface) mm 1979 1979 2094
9 Width mm 1070 1070 1140
10 Height when mast lowered mm 1975 1975 1975
11 Height when mast extended mm 4010 4010 4010
12 Height to safeguard mm 1971 2011
13 Turning radius Min. mm 1643 1643 1758
14  Front overhang mm 371
15/16 Tread F/R mm 924/186 924/186 942/186
17 Ground clearance Min. mm 90
18 Wheelbase mm 1400 1400 1515
19 Fork spread Min./Max. mm 200/890
20 Working aisle width with pallet(Ast)* 1000×1200 crossways mm 3340 3340 3445
21 800×1200   lengthways mm 3464 3464 3579
Performance 22 Speed Travel(Laden) km/h 13 13 13
23 Travel(Unladed) km/h 13 13 13
24 Lifting(Laden) mm/s 290 280 255
25 Lifting(Unladed) mm/s 445 435 435
26 Gradeability Laden % 15
27 Unladed % 15
28 Service weight Include battery box kg 3080 3140 3430
29 Tyre Front×2
18×7-8 18×7-8 200/50-10
30 Rear×2
Driven 31 Motor Driven motor kw 4×2 4×2 4×2
32 Pump motor kw 9.2 11 11
33 Battery Standard(Option) V/Ah 48/500 48/500 48/620
34 Controller Type
35 Manufacturer
36 Operating pressure for attachment Mpa 14.5 17.5