Home » Products » 3.0-3.5T
Share to:




The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications. 
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.



Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.



Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.



An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.



The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.



Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace. 
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.



MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.



Forklift Specification

General 1 Model
2 Type
Gasoline&LPG Gasoline&LPG
3 Optional type
4 Rated capacity Kg 3000 3500
5 Load chart mm 500 500
Characteristic & dimension 6 Lift height mm 3000 3000
7 Free lift height mm 165 170
8 Fork size L×W×T mm 1070x122x45 1070x122x50
9 Fork regulating range Min./Max. mm 250/1100 260/1100
10 Mast tilt angle F/R Deg 6°/12° 6°/12°
11 Front overhang mm 490 505
12 Rear overhang mm 518 580
13 Min. ground clearance(bottom of mast) mm 140 140
14 Overall dimensions Length to face of fork(without fork) mm 2680 2750
15 Overall width mm 1210 1210
16 Mast lowered height mm 2075 2150
17 Mast extended height(with backrest) mm 4140 4140
18 Overhead guard height mm 2170 2170
19 Turning radius(outside) mm 2450 2510
20 Min. right angle stacking aisle width Pallet size a12=1000,b12=1200 mm 4140 4220
Pallet size a12=1200,b12=800 mm 4340 4420
Performance 21 Speed Travel(Unladen) Km/h 20 18.5
22 Lifting(Laden) mm/s 420/460(WG3) 420/360(WG3)
23 Lowering(Laden) mm/s 430 430/380(WG3)
24 Max. drawbar pull KN 17 17
25 Max. gradeability(Laden)
20 18
Tyre 26 Tyre Front mm 28*9-15-14 PR 28*9-15-14 PR
27 Rear mm 6.50-10-10 PR 6.50-10-10 PR
28 Tread Front mm 1000 1000
29 Rear mm 980 980
30 Wheelbase mm 1700 1700
Weight 31 Self weight kg 4260/4230(WG3) 4680/4650(WG3)
32 Weight distribution Laden Front axle kg 6460/6450(WG3) 7220/7210(WG3)
33 Rear axle kg 800/780(WG3) 960/940(WG3)
34 Unladen Front axle kg 1720/1710(WG3) 1640/1630(WG3)
35 Rear axle kg 2540/2520(WG3) 3040/3020(WG3)
Power&transmission 36 Battery Voltage/Capacity V/Ah 12/60 12/60
37 Transmission Manufacture
China China
38 Type
Powershift Powershift
39 Stage F/R
1/1 1/1
40 Operating pressure(for attachments) Mpa 17.5 17.5